In this blog, we’ve discussed a few different ways to integrate sensors into a Peakboard application. You can see an overview of these articles in The hitchhiker’s guide to I/O devices. In today’s article, we’ll take a look at a sophisticated and slightly more expensive type of I/O module—an IO-Link...
In part one and part two of our ProGlove mini-series, we discussed the basics of integrating ProGlove scanners into Peakboard applications. We used both the USB and MQTT modes to get the scan event and related metadata. We also discussed options to send feedback to the scanner operator, such as...
In the past few weeks, we’ve discussed two I/O modules provided by ICP DAS: the ET-2254 and the U-7560M. In this article, we’ll take a look at the Advantech WISE-4012. This module provides a network connection via Wi-Fi. It offers two digital-only outputs and four analog/digital inputs. We will look...
In this blog, we’ve explained how to connect various devices to Peakboard, and build beautiful applications. One family of devices is I/O devices. These are used to connect any kind of sensor, like light barriers, buttons, and temperature sensors. On the output side, we often see actors like traffic lights...
In the first part of our ProGlove miniseries, we discussed the basics of integrating ProGlove scanners into Peakboard applications. We used both the USB and MQTT modes to get the scan event, along with some metadata. In the third part of the series we will build a full blown use...
In a previous article, we discussed an I/O module made by the Taiwan-based company ICP DAS. In today’s article, we will discuss another I/O module from the U-7500 series: the U-7560. It has 6 digital inputs and 6 relay outputs. The main difference is that it supports OPC UA as...
ProGlove creates next-generation barcode scanners that are integrated into a glove, so the user can scan barcodes without having to pick up and put down a conventional barcode scanner. The scanner is always “at hand.” For readers who’ve never seen a ProGlove scanner before, here’s what it looks like: In...
ICP DAS is a Taiwan-based company that sells industrial components for automation. In today’s article, we’ll take a closer look at ET-2254, a 16-channel I/O module that provides digital input and output pins, and comes with a cool MQTT interface that makes it easy to create a stable connection to...
Modbus is a standardized protocol for addressing sensors. It was invented by Schneider Electric back in the late 70s, but is still widely used. In this article, you will learn how to use the Peakboard Modbus data source to address a sensor, get the values, and do something useful with...
In this two-part article series, we discuss some best practices for integrating Peakboard with Node-RED applications. Most of the time, communication between Node-RED and the outside world happens through MQTT or HTTP. We will use the HTTP option: Part I - Real-time calculator - How to send information from Peakboard...
In this two-part article series, we discuss some best practices for integrating Peakboard with Node-RED applications. Most of the time, communication between Node-RED and the outside world happens through MQTT or HTTP. We will use the HTTP option: Part I - Real-time calculator - How to send information from Peakboard...
In today’s article, we will discuss narrowband IoT devices. Narrowband IoT devices are usually not connected to any kind of Wi-Fi or local company network. Instead, they use the cellular network to connect to a server. For technical details, see this Wikpedia article on Narrowband IoT. The device we will...
In this article, we learned how to subscribe to OPC UA nodes and process the incoming values. The example was based on an A/C that provided several values, like the temperature and power consumption. Make sure to read that article first, because today we will learn how to switch the...
OPC UA may be a complicated topic, but if you’re new to OPC UA, this article is the perfect starting point. Minimum requirements except for having the Peakboard Designer installed: Nothing! You can start right away, because we’re using an OPC UA server that is available to the public. Check...
This article combines several technologies and explains how to use them. Here’s the goal: Every time a ticket is created in Zendesk, it should be sent to a Peakboard announcement board informing the viewer about the new ticket. Here are the steps to do it, with the help of n8n.io:...